|
| 1.Low price and high reliability
2.105 output capacitor
3.AC input power suitable for the world
4.High efficiency and low operation temperature
5.Soft-start current can reduce the AC input impact effectively
6.With short-circuit and overload protection
7.Compact size, light weight
8.100% full-load burning test
9.Installed with EMI filter, minimum wave | Model Specification | T-30A | T-30B | CH1 | CH2 | CH3 | CH1 | CH2 | CH3 | DC output voltage | 5V | 12V | -5V | 5V | 12V | -12V | Output voltage error (Note2) | ±2% | +2,-6% | +2,10% | ±2% | +2,-6% | ±6% | Rated output current | 3A | 1A | 0.5A | 3A | 1A | 0.5A | Output current rage | 0.5-3A | 0.1-1A | 0.1-0.5A | 0.5-3A | 0.1-1A | 0.1-0.5A | Wave and noise(Note3) | 50mVp-p | 100mVp-p | 50mVp-p | 50mVp-p | 100mVp-p | 100mVp-p | Inlet stability(Note4) | ±0.5% | ±1% | ±1% | ±0.5% | ±1% | ±1% | Load stability(Note5) | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | DC output power | 30W | 33W | Efficiency | 70% | 72% | Adjustable range for DC voltage | CH1+10,-5% | CH1+10,-5% | AC input voltage range | 85132VAC/170264VAC selected by switch 4763Hz;240370VDC | Input current | 0.8A/115V 0.45A/230V | AC impulse current | Cold-start current 18A/115V 36A/230V | Leakage current | <0.5A/240VAC | Overload protection | 105%150% TypeFOLDBACK Pulsing hiccup shutdown Reset: auto recovery | Over-voltage protection | | High-temperature protection | | Temperature coefficient | ±0.03%(050) ON+5V OUTPUT | Setup rise hold up time | 200ms,100ms,30ms | Vibration | 10500Hz,2G 10min./1cycle,Period for 60min,Each axes | Withstand voltage | Input and output interval1.5KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC | Isolation resistance | Input and output interval,Input and enclosure,Output and enclosure0500VAC/100M Ohms | Working temperature and humidity | -10+60,20%90%RH | Store temperature and humidity | -20+85,10%95%RH | Overall dimension | 129*98*38mm | Weight | 0.4Kgs | Safety standards | Meet UL1012 requirement(not apply for the mark) | EMC standards | Meet FCC Part 15J Conduction class A | Note: 1.The testing condition for the parameter above is:230VAC input, rated load,25 70%Rh,Humidity
2.Error,include the setting error ,line stability and load stability.(Note:5)
3.Wave test:adoptingA12double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting
4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.
5.Load stability test: The load is from 0% to 100%,others 60%.
6.C2311must be knocked down. |
|
|
switching power supply(T-30)
