|
| 1.Low price and high reliability
2.105 output capacitor
3.AC input power suitable for the world
4.High efficiency and low operation temperature
5.Soft-start current can reduce the AC input impact effectively
6.With short-circuit and overload protection
7.Compact size, light weight
8.100% full-load burning test
9.Installed with EMI filter, minimum wave | Model Specification | D-60A | D-60B | CH1 | CH2 | CH1 | CH2 | DC output voltage | 5V | 12V | 5V | 24V | Output voltage error (Note2) | ±2% | ±6% | ±2% | ±5% | Rated output current | 46A | 3A | 3A | 1.8A | Output current rage | 0.3-6A | 0.2-4A | 0.3-6A | 0.2-2.2A | Wave and noise(Note3) | 75mVp-p | 150mVp-p | 75mVp-p | 150mVp-p | Inlet stability(Note4) | ±0.5% | ±1% | ±0.5% | ±0.5% | Load stability(Note5) | ±0.5% | ±4% | ±0.5% | ±4% | DC output power | 56W | 58W | Efficiency | 73% | 76% | Adjustable range for DC voltage | CH1+10,-5% | CH1+10,-5% | AC input voltage range | 85264VAC 4763Hz;120-370VDC | Input current | 2A/115V 1A/230V | AC impulse current | Cold-start current 30A/115V 60A/230V | Leakage current | <1A/240VAC | Overload protection | 105%150% TypePULSING HICCUP SHUTDOWN; Reset: auto recovery | Over-voltage protection | CH1:5.756.73V | High-temperature protection | | Temperature coefficient | ±0.03%(050) ON+5V OUTPUT | Setup rise hold up time | 800ms,50ms,10ms/115VAC 300ms,50ms,80ms/230VAC | Vibration | 10500Hz,2G 10min./1cycle,Period for 60min,Each axes | Withstand voltage | Input and output interval3KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC | Isolation resistance | Input and output interval,Input and enclosure,Output and enclosure0500VAC/100M Ohms | Working temperature and humidity | -10+60,20%90%RH | Store temperature and humidity | -20+85,10%95%RH | Overall dimension | 159*97*38mm | Weight | 0.55Kgs | Safety standards | Meet UL1012 TUV(En55022) CLASS B, IEC801-2,3,4 IEC555-5 | EMC standards | | Note: 1.The testing condition for the parameter above is:230VAC input, rated load,25 70%Rh,Humidity
2.Error,include the setting error, line stability and load stability.(Note:5)
3.Wave test:adoptingA12double wire for 20MHz,and 0.1uF&uF capacitor short-circuit for interrupting
4.Inlet voltage stability test: when is over load, the lowest voltage of inlet is representative to the highest voltage.
5.Load stability test: The load is from 0% to 100%,others 60%.
6.C2311must be knocked down. |
|
|
Switched power supply(D-60)
